Exploded View - Clutch Housing

Countershaft Inspection (M/T)
Inspect the gear and bearing contact areas for wear and damage, then
measure the countershaft at points A, B, and C. If any part of the
countershaft is less than the service limit, replace ...
Tool Maintenance
Follow these instructions to keep the ATF cooler cleaner working properly:
Replace the two magnetic nonbypass spin-on filters after every 20 hours
of use, based on the hour meter, or when yo ...
Rocker Arm Assembly Installation
If the rocker arm assembly is disassembled, reassemble the rocker arm
assembly.
Apply engine oil to the end of the valve stem.
Install the rocker arm assembly.
...