Honda Fit: Models with 5 positions AT Shifting
Change the shift position in accordance with your driving needs
■ Shift lever positions
You cannot turn the ignition switch to LOCK
and
remove the key unless the shift lever is in
.
The vehicle may move forward very slightly even in
while the engine is cold.
Depress the brake pedal firmly and, when necessary, apply the parking brake.
See also:
Instrument Panel Removal/Installation
Special Tools Required
KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call
888-424-6857
NOTE:
Take care not to scratch the dashboard or its ...
Auxiliary Input Jack
Use the jack to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the
input jack using a 1/8 inch (3.5 mm) stereo
miniplug.
► The audio system a ...
EPS Control Unit Removal/Installation
Do the battery terminal disconnection procedure.
Remove the under-dash fuse/relay box.
Disconnect EPS control unit connector A (11P) and connector B (16P) by
pus ...
Categories
