Driveshaft Disassembly
Special Tools Required
Threaded Adapter, 22 x 1.5 mm 07XAC-001010A
Slide Hammer 5/8''-18 UNF, commercially available
Bearing Puller, commercially available
Boot Band Pliers, commerci ...
Dashboard Center Lower Trim Removal/Installation
Special Tools Required
KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call
888-424-6857
NOTE:
Take care not to scratch the dashboard or its ...
Disassembly
Compress the damper spring, then remove the nut (A) while holding the
damper shaft with a hex wrench (B). Do not compress the damper spring more
than necessary to remove the nut.
...