Transmission End Cover Park Lever Stop Inspection and Adjustment (A/T)
Set the park lever in the P position.
Measure the center-to-center distance (A) between the park pawl shaft (B)
and the park lever roller pin (C).
Sta ...
Lift and Support Points
NOTE: If you are going to remove heavy components such as suspension or the fuel
tank from the rear of the vehicle, first support the front of the vehicle with tall
safety stands. When substantial ...
Inspection
Install the nut on the damper shaft end, and set the socket wrench and
T-handle on the nut.
Compress the damper assembly by hand, and check for smooth operation
through a full ...