Honda Fit: Engine Control

See also:

Front Lower Arm Removal/Installation
Special Tools Required Ball Joint Thread Protector, 14 mm 071AF-S3VA000 Ball Joint Remover, 28 mm 07MAC-SL0A202 notice Do not remove the lower arm from both sides a ...

Reverse Shift Fork Clearance Inspection (M/T)
Measure the clearance between the reverse idler gear (A) and the reverse shift fork (B) with a feeler gauge (C). If the clearance is more than the service limit, go to step 2. ...

M/T Differential Carrier/Final Driven Gear Replacement (M/T)
Loosen the bolts in a crisscross pattern in several steps, then remove the final driven gear (A) from the differential carrier (B). Install the final driven gear with the cham ...