Honda Fit: Transmission Mounts

See also:

Breather Line and Suction Line Inspection (Page-2)
Attach the fuel pressure gauge attachment. Then connect the vacuum pump/gauge (A) to the suction line (B), and apply vacuum to the line: If the line holds vacuum, check for a blocka ...

Inspection
Install the flange nut on the damper shaft end, and set the socket wrench and T-handle on the nut. Compress the damper assembly by hand, and check for smooth operation through ...

Inboard Joint Side
Remove the boot bands. Be careful not to damage the boot. If the boot band is welded type (A), cut the boot band. If the boot band is a double loop type (B), lift up the ban ...